Ceramic Protectant UG-RL20-performance, high-density, ceramic powder as a filler in the patching material. It is a low viscosity, can be painted construction, used to seal and protect new or repaired mechanical component surface, to prevent fluid erosion, anti-cavitation, and chemical resistant purposes. Typically the coating thickness of about 25mil (about 0.635mm), high temperature caused 856 ℃. There are three colors for selection, red, blue, white, which requires the use of multilayer coatings in case, the different colors can be used to achieve the purpose of visual inspection. Which can be painted white ceramic Putty is a special formula made to meet the needs NSF, USDA, FDA, and NR approved occasions. Moreover, the same system can be repaired in the drinking water applications. This product is the nano-zirconia, nano-alumina, titanium oxide nano-mixing and on this basis, constituted by a combination of the two materials into a smooth protective coating, after curing, low viscosity system, durable, can be painted for corrosion resistance, corrosion resistance, abrasion resistance, anti-chemical corrosion coating systems! Brushing can work the way, consistency is low, the gap permeable metal surface to prevent pitting and crevice corrosion and bimetallic corrosion, cured to form a smooth and friction-containing ceramic surface. Its smooth surface can reduce the eddy current and improve the pumps, valves and other fluid efficiency of the device. 1, can be used as the other end of the outer protective construction Putty; 2, suitable for filling various metals, ceramics of injury. 3, the main pump chamber for repair, impellers, propellers, valve, tank pipe, valve, valves, flanges; pipe wall repair; 4, heat exchangers, condensers, separators, distillation, evaporator, cooling system repair. 5, for sealing, repair and protection of new or patched surface treatment, such as heat exchangers, piping plate, the tank, the pump housing, impeller blades and gate, ducts, etc. flange surface.